TECNO KC1H DUMP

 READ BY UFI BOX 100% TESTED

Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: FE62MB (0x464536324d42), rev: 0x03, serial number: 0x5A3D963B
 Manufacturing date: Jun 2019
CID: 15010046 4536324D 42035A3D 963B6606
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
 Boot acknowledge is sent during the boot operation
 Boot partition 1 is enabled for boot
Partitioning support: 0x07
 Device support partitioning feature
 Device can have enhanced technological features
 Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
  Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
 Power-on write protection: possible
 Permanent write protection: possible
 Lock status: not locked

ANDROID System Info:
 platform: MT6761, cpu abi: armeabi-v7a
 manufacturer: TECNO MOBILE LIMITED
 board: TECNO-KC1h, name: H6114C
 brand: TECNO, model: TECNO KC1h
 build model list: TECNO KC1h
 build id: PPR1.180610.011, version: 9 Pie (KC1h-H6114C-PGo-200112V210)
 build description: full_kc1h_h6114-user 9 PPR1.180610.011 57800 release-keys

crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\FE62MB_5A3D963B.ext_csd"
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMFE60012M-B214/16GB+LPDDR3 8Gb   (BGA221)